PCMtuner-tool

  Alientech KESS3 new user report: New Holland Model: T4 2021 Version T4.65 3.4L ECU Bosch MD1CS069 Protocol 1678 Read on bench Write on bench Checksum by kess3. Need truck/agricultural machinery license activated. www.iecutool.eu

 Foxflash tech released an offline dongle for Foxflash to work without network connection. How to get the offline dongle for Foxflash? 1: Only old customers can get foxflash dongle 2: If an old customer successfully introduces a new customer order Foxflash, he or she can receive a dongle for free. 3: Get the dongle for free. The Foxflash dongle will be mailed to you 30 days after the customer you introduced purchases the dongle and receives the Foxflash. 4: You will need to pay for postag ( 50USD ). 5: The dongle has not been activated, it is just a blank dongle. Authorized activation will be confirmed by Foxflash. When they think it can be activated, they will notify everyone to activate it. We currently do not sell any Foxflash offline dongles individually, you must have foxflash ECU/TCU programmer. NOTE: Provide your foxflash serial number to us to activate offline dongle. Contact us if you need the foxflash offline dongle. Whatsapp: +8618046220975 Email: Sales@iEC

 When reading your remap with foxflash programmer via obd2 (i.e DCM6.2V) and this error pops out ERROR SEED-KEY what does it actually mean? Its pretuned and seedkey changed so cant work via obd. Well basically its saying that someones allready been on there. It prevents obd2 read/write, so only way is to bench or bdm your way in. This is just another from of antituning protection used by tuners, companies as well as independent ones. It doesn’t actually prevent anything but on some cases makes things a little more demanding on tools. Celtic tuning and many other commercial tuning providers use this form of protection. www.iecutool.eu

  Foxflash new user report: Got a new work table and power source, first test with new setup. Audi A6 C7 3.0tdi 160kW ECU EDC17CP54 Read ok on bench Write ok bench Checksum by tool. Adblue off. No problems, all good. You reset all adblue related stuff with diagnostic software. (I used launch) Then removed ecu from car, read soft from ecu, sent it to tuners, received modified file back, write the modified file back to ecu, installed Ecu to car, started the car and all the errors was gone, simple as that, no need to disconecct something, if needed they will let you know. Foxflash Pinout to BOSCH EDC17 C54 [ 1797 ] — VW, Audi, Seat, Skoda [Diesel] To read and write use the following driver: → BENCH TRICORE → VOLKSWAGEN / AUDI / SEAT / SKODA → TC1797 — VAG → EDC17 C54 www.iecutool.eu

  Problem: Problem reading JTAG on Citroen DCM3.5, foxflash reported "Error OSR"; What is the solution? Solution: Double check wiring diagram. Or try to reverse the jtag rainbow cable. This is the way how the customer did it.

 Will Formula Flash do Checksum + Tprot off on EDC17C60? Yes, it does checksum correction and automatically Tprot off. FormulaFlash programmer new user feedback Peugeot Edc17C60 ECU Read on bench Write on bench Connections ok, checksum ok by tool. Tprot off automatically. That’s good news. If you have bad internet connection, the tool will not connect properly (may need to manual Tprot off.). www.iecutool.eu

 Will Formula Flash do Checksum + Tprot off on EDC17C60? Yes, it does checksum correction and automatically Tprot off. FormulaFlash programmer new user feedback Peugeot Edc17C60 ECU Read on bench Write on bench Connections ok, checksum ok by tool. Tprot off automatically. That’s good news. If you have bad internet connection, the tool will not connect properly (may need to manual Tprot off.). www.iecutool.eu