PCMtuner-tool

  Question 1: I've ordered a foxflash tool . I need to change the registered email from xxx@gmail.com to xxx@hotmail.com. How to do it? Question 2: I sold my Foxflash to one of my friends, can i transfer ownership to my friend? How to Transfer Foxflah Onwership? Read the rules on the official website. Communication of used tools 1. Contact your seller (send S/N, order number, your seller will report the request to foxflash team to confirm you are purchasing an eligible item) 2.Contact info@dfb-technology.com (send S/N, seller information and request) Before buying used foxflash products we ask you send both the serial number of the tool and the data of the seller so that you know -Type of license and activated software packages – Possibility of installation on other computers -Warranty on any damage -Cost of transfer of ownership Contact info@dfb-technology.com www.iecutool.com

  Problem: Double-clicked Foxflash software icon on the desktop, but it is not working. No response. Any solution? Solution: Your computer system does not have administrator privileges. Make sure super administrator privileges are enabled (Google search how to enable super administrator privileges.) Or change another operating system (Win10 64bit is better) www.iecutool.com

 If fails to read VAG DL501 gearbox TCU with foxflash , check if bench box is connected. It cannot read if not connecting bench box. Foxflash reads/writes DL501 TCU no problem, check http://www.pcmtuner.org/foxflash-read-and-write-porsche-dl501-gen2-gearbox/ PCMTuner also read/write DL501 gearbox without issue. For example: Audi A6 TCU Dl501 read and write with PCM tuner success

  Problem: Foxflash read Opel Astra Delco E98 ok, but failed to write via OBD, error DAT1. Any solution? Solution: Raise voltage. If still fails, do it via Full system. Don't connect bench box if doing full system. Tested by many without problem on bench. For example: http://www.pcmtuner.org/foxflash-read-and-write-open-insignia-delco-e98/

  Foxflash user feedback: Foxflash Read and Write Marelli mjd 8ds in jtag mode successfully Read by fox ok Write by Fox ok Checksum by fox ok You can also do full system no need to open the ecu. if I did a full read but only needed flash while writing. MJD 8DS jtag pinout to foxflash To read and write use the following driver www.iecutool.com

  Foxflash user feedback: Citroën jumper 3 2021 Stage 1 Dcm7.1a Boot mode Read/write ok Checksum by foxflash perfectly Only one difficulty find & reach the pin boot under the processor but with good eye its ok. Check DCM7.1A/B boot mode pinout here http://www.pcmtuner.org/foxflash-read-and-write-citroen-jumper-dcm7-1b/

  Foxflash user feedback: Hyundai i30 2009 Ecu Kefico/bosch m7.9.8 Read ok in boot Write ok in boot Checksum by foxflash Immo off Pinout is in the document.