PCMtuner-tool

  Problem: Installed FoxFlash software on win11pro, activated via fox flash manager program The app keeps flying out. Any solution? Solution: You must run the foxflash manager (Keep Foxflash manager open, do not close), then shut down your laptop auto time sync button, then click active as activated, then go running foxflash.

  Foxflash software multiple installations guide- When we say up to 3 computers we do not mean simultaneous use. Your hardware is bound to your computer. If you wish to install it on another computer, your hardware needs to be un-bonded from others. To do this please contact dfb-technology.com. You only have one tool, not multiple, it is for security reasons. Hope this clears up the confusion.

  Foxflash ecu programmer arrived today. Tested with "Smart 453 NA ECU MED17.9.20" Read: ALL OK, EEPROM only OK, Flash only OK Write: ALL ok, EEPROM only OK, Flash only OK For confirmation, check the identity of each written data and the original data OK Although it is a test on a high-spec PC, if this TOOL is connected from the beginning and the PC is started, the operation of the PC is stable. I think that it is better to connect this TOOL after starting the PC. The supplied AC adapter does not provide enough voltage, so I am connecting an external stabilized power supply. Probably, 3A or more is necessary. This is my case, but I use a cheap "out 13.8V/MAX 30A" on my desk, and a "GYS GYSFLASH 121.12 CNT FV" for the stabilized power supply to the vehicle.

  FoxFlash ecu tool was arrived and activated. The first test was a VAG EDC17C64, it works fine. Set up bench wiring connection Foxflash EDC17C64 bench pinout To read and write use the following driver: → BENCH TRICORE → VOLKSWAGEN / AUDI / SEAT / SKODA → TC1797 — VAG → EDC17 C64 Foxflash software read it super fast. Next time i will try to read it via OBD.

 Dacia Duster 1.5DCI — 2011 DCM3.4 OBD Read and Write with pcmtuner successfully. With OBD module 25. Checksum ok.

  Fetrotech tool silver read and write BMW E90 EDC16C35 successfully, Dpf off. Checksum ok, very fast read / write. The fetrotech silver works separately from pcmtuner. I made a change like this .

 How to install and activate FoxFlash ECU tuning software ? Operating system: Compatible Operating Systems: Windows 7 Windows 8/8.1 Windows 10 Windows 11 Recommended Configuration: CPU > 2.5 GHz (Intel i5, i7) RAM > 4GB 64 bits Software language: Italian, English, Dutch, French, Spanish, Polish, Portuguese, Romanian, Czech, Turkish How to use foxFlash Manager and foxFlash software 1 go to https://www.dfb-technology.com/download.html download foxFlash Manager app 2install this software on your laptop 3 register this app with your email 4 input your code which tie on your device, don't spead yours sn to internet, or others guy will try to stolen your tools password 5 connect your foxflash tool to laptop via usb cable then clicke the download button which in foxFlash app inside After download finish ,pls open the folder C:\Program Files (x86)\FoxFlashManager\foxflash\DFB Technology\DFBTech_DRIVER Install the drivers 6 disconnect your foxflash tool , then