PCMtuner-tool

Problem: New KT200/ Foxflash keeps getting this message when I try to write it to the replacement DME VW MED17.1. When I try to write Ori file on used junkyard ecu I have this error: "uncorrect file 01000 — OTP sector not writeble." Any solution? Solution: The ecu file needs to be cloned OTP's taken from clone file copied to ori file. If you can not write in bench, open the ecu and write in boot mode. Feedback: I use Foxflash with "tricore clone method boot modality" using bench mode and in this way I have obtained a writeable file.

  Problem: Read Opel Vivaro EDC16 via obd with foxflash to remove EGR on devinci but wasn't available when tried different software write back in now got no revs. Launch X431 scanner gets injector fault code P0611. Any solution? Solution: Thi model is Renault engine. You lost injector codes. You need to recode them. If the car starts without a problem you need to reset the injector code and also see if the calculator has not lost the serial number.

  Question: The foxflash main box work with obd and direct connect bench. But if i used the in some cases if need, the bench box, no have connection. Is there any way to test bench box? Connect the bench box to the foxflash tool and power it through th round jack of the bench box itself or from the round jack of the foxflash tool. Run foxflash manager Select Tools Bench Mode->Test for Bench Boxes->Test Bench Box V2 This driver is useful for testing the Bench box. During the test -the relays will be triggered at different speeds -the red LED will flash several times Press Start Test Bench box self-test finished. If bench box self-test result is fine, but software has no communication, the problem can be the voltage, ecu or wiring connection. https://www.iecutool.com/service/foxflash-bench-box-self-test.html

 PCMTuner dongle (pcmflash 1.2.0) will read Gen2 Mazda3 (2010+) ECU via OBD module 9. If already remove ECU from car, it can be read via OBD on bench mode using Godiag adapters. Tools used: Scanmatik pro2 PCMTuner dongle Godiag GT100+ breakout box Godiag ECU Boot GPT adapter (the adapter can be used with pcmflash + j2534 device to read ECUs in boot, bench or GPT mode) Connect SM2 Pro with laptop and gt100 Connect godiag ECU adapter with gt100 Connect godiag ECU adapter with ECU via jumper cables following the wiring diagram Connect 12v powre supply to gt100 Plug pmctuner dongle to laptop Press the MNL button on the godiag ECU adapter Run pcmflash software (DON'T UPDATE SOFTWARE ONLINE) Select procotol Read ECU Read ECU completely. Save data. www.iecutool.com

 Question: How to read Mercedes Delphi CRD2.16 ECU with foxflash ? cannot find wiring diagram to this ECU. Solution: Jtag boot read this ecu. Same pinout as Delphi CRD2.10 SOLENOID OBD JTAG_BOOT. Connect the multifunction cable as follows: Solder 3 links on the pcb: Solder the rainbow flat cable on the pcb: To read and write use the following driver: Foxflash team is developing a new adapter for jtag. You can connect the new adapter and read this ECU by OBD.

  Problem: I installed foxflash tool on one laptop, no problem. Now i want install it to a different laptop and i can not continue. How to log in foxflash on second laptop? Solution: Just use the same email and code (device S/N) as you input on 1st laptop. Read also: http://www.pcmtuner.org/foxflash-ecu-software-installation-guide/

 PSA Marelli IAW 6LP Is Safe Read and Write with Foxflash on OBD? Foxflash doesn't read it for obd. It will do it in boot mode. If need to read it by OBD, go for ktag. If have foxflash tool, do it like this. PSA Marelli 6LP HW01 MARELLI 6LPx Vers.1 [ ST10F280 / ST10F296 ] — Peugeot, Citroen [Gasoline] Connect multifunction cable and the resistances as shown. To read and write use the following driver: → TOOLS BOOT MODE → ST ST10Fxxx → ST10F280 or ST10F296 PSA Marelli 6LP HW02 MARELLI 6LPx Vers.2 [ ST10F280 / ST10F296 ] — Peugeot, Citroen [Gasoline] Connect multifunction cable and the resistances as shown. To read and write use the following foxflash driver : → TOOLS BOOT MODE → ST ST10Fxxx → ST10F280 or ST10F296 PSA Marelli 6LP HW03 MARELLI 6LPx Vers.3 [ ST10F280 / ST10F296 ] — Peugeot, Citroen [Gasoline] Connect multifunction cable and the resistances as shown To read and write use the following driver: → TOOLS BOOT MODE → ST ST10Fxxx → ST10F280 or ST10F29