PCMtuner-tool

 Foxflash programmer read and write BMW S7 G12 3.0 MD1CP002 ECU successfully. foxflash pinout to BOSCH MD1CP002 [ SPC5777] — BMW [Diesel] To read and write use the following driver: → BENCH MODE → BMW → SPC5777 — BMW → MD1CP002 ECU tool recommendation: PCMtuner https://www.iecutool.com/wholesale/pcmtuner-ecu-programmer-tool.html

  Problem: Today i read and wrote md1cs003 adblue off using fetrotech tool . cheksum with fetrotech Car started 3 times and then it wouldn't start And dtc ecu P3028 What To do? Solution: TPROT off needed for PSA MD1CS003. Make Tprot off. How to do tprot on this ECU? At the address: 0x2A5D40 2D 0F 00 00 0C C2 → TPROT ON 2D 0F 00 00 82 4F → TPROT OFF if it doesn't work, rewrite original eeprom/flash for the car to start. Read also: http://www.pcmtuner.org/fetrotech-read-and-write-psa-md1cs003/ FoxFlash Read and Write PSA MD1CS003 with Tprot

  Problem: I have a problem reading Denso suzuki swift 1.3 Denso 64F7055 full system. I use pinout by foxflash . Do i do somethingh wrong? Here is the clue. Disconnect from ecu, USB and POWER. Resrart computer if you made many attempts. Switch off MFC, try 13.5v. Reconnect and ensure all connects to ecu are firmly on, switch on MFC and restart software and try ID if 1.3 engine please make GND here, as diagram in foxflash is for 2.0/2.3 ecu FYI: Foxflash pinout to Denso 64F7055 ECU (2.0/2.3 ecu) If try all above, and still no luck reading this ecu, check ECU label. If the ecu is encrypted, foxflash cannot read it.

  Problem: I failed to read Fiat Ducato Marelli MJD 8F IAW ecu with the foxflash programmer on bench. It reads ID but failed to read data (error boot1). Any advice? Solution: Foxflash will read and write Marelli MJD8F full system. It will read the whole backup. DON'T CONNECT BENCH BOX WHEN READ THIS ECU. You can also read and write with foxflash in jtag mode. MARELLI MJD 8F, 8S, 8DS — FIAT, Suzuki [Diesel] Connect the multifunction cable as follows: Solder the rainbow flat cable on the pcb: To read and write use the following driver: Related reading: http://www.pcmtuner.org/kt200-failed-to-read-fiat-marelli-6f3-solution/

  Problem: I have a problem with my new KT200 programmer . Run KT manage, but software failed to start. It gave me errors below: Solution: Most of the case is the operating system issue. Change a Windows 10 64-bit system laptop. 1 Shutdown date and time automatically syncs 2: shutdown defender 3: shutdown antivirus system 4: run kt suit manger click active button 5 : keep manger run 6: run kt suit

 Foxflash read and write Peugeot 2008 year 2019 MD1CS003 on bench successfully. *** Peugeot 2008 1.5 BlueHDi 100hp *** *** Year 2019 *** *** MOTOR CODE YHY *** *** MD1CS003 Bench mode *** *** Read/Write/ChecksumBy FoxFlash *** *** AdBlue OFF ***

 Some users reported they try to download foxflash software to a new computer but showed this message: Error "Execute Download with DFBTech_UPDATER for Tool" Solution: Make sure 1. Defender off ( check if there is " version.dll ' file in dfb folder. Don't let anti-virous program eat this file ) 2. Date/time sync off (When you click ACTIVATE your time should go to 00:00) 3. Have a good internet connection. 4. ensure Foxflash is connected with both USB and 12V power 5. check windows device manager that your foxflash is showing as installed. If did all above but had no luck, do a FULL re-install. Delete all existing dfb files, download all again. something blocks the software. Disconnect the interface and click download, then restart FoxFlash manager and the tool's software. If still not working, contact www.iecutool.com engineer if you bought the device from us.