PCMtuner-tool

 How to download, install, activate and register Fetrotech tool software ? Operating system requirement: Win10 Professional 64bit is recommended. Better don't set up on Home edition O/S Please ensure admin privileges, dot net 4.8 installed, and all firewall/anti virus/Realtime protection off for installation. Here is the easy software installation guide, no more software crash problem. To avoid software crash problem, download patch file here ( FE Version patch ) 1. Connect Fetrotech hardware Before installing software, connect fetrotech with computer and power supply 2. Download Fetrotech Tool Visit www.tuner-box.com Go to Download and download Fetrotech Tool software. Download and extract fetrotech tool setup zip file to desktop 3. Install Fetrotech Software Turn off anti-virus program before installing software. Install Fetrotech tool setup Install AMT driver Press Install to allow install AMT driver Finish Install driver Install driver until finished

  Fetrotech tool released new software update on Aug. 9th, 2023. What's new? 1: Easy install 2: fix some of the medc17 checksum error 3: some of medc17 bypass add 4: Solve the taskbar crash 5: Change login method for tool user 6: Auto active tool, no need to contact seller to activate. Notice: all update support from 09.08.2023 activated user, the old user need contact seller get the update. No more taskbar disappearing or software crash issues. www.iecutool.com

What's the difference between Foxflash and TagFlash ECU & TCUprogrammer? Foxflash/KT200 and Tagflash are different tools as such so are D-fox and fgtech. They have different protocols as they are different companies. There are differences in the updates in the last few years. TagFlash is the clone of fgtech. Hardware is different from FoxFlash/KT200, the PCB is almost the same as the old Galletto. Hardare is newer version than old fgtech firmware 0386 and 0475. When you look into tagflash software and you will see a fgtech dll file. They have different software, you cannot port the fg software onto the Foxflash/KT200. Tagflash is not manufactured by ecuhelp who made the KT200. Tagflash simos 18.10 boot mode not possible, read write pcr 2.1 on bench without modifications, all fine but no eep unlock like kt200/foxflash. also no obd2 unlock on pcr 2.1 like TagFlash must use gender changer, if forget to use the changer, when read ecu by obd, i.e EDC16U1 you plug in the usb

  Problem: PCMTuner failed to read EDC17C74 on bench mode. pinout was good. where is problem with reading? Here are some tips: 1. Give it 13.5v power supply and you'll be fine. or read again several times, it should be fine. 2. Try obd module 50 virtual read. Feedback: done it like that (vr read) and write was Ok. www.iecutool.com

 EDC17CP20 Audi A4 B8 2.0 TDI EDC17CP20 read and write OK with Fetrotech tool . DPF, EGR OFF STAGE1 Read and Write OK [Fetrotech] The fetrotech silver has died. Remove the black case to the silver one. Please use this pinout. gpt remains unchanged. www.iecutool.com

Fiat 500 MARELLI IAW 9GF read/write with foxflash successfully on bench in car. MARELLI 9GF — Fiat, Alfa Romeo, Lancia [Gasoline] bench pinout to foxflash read, write ok, checksum by tool.

 Q: Who were able to read/write VAG DSG DQ200 MQB Gen2 gearbox with Foxflash ? What is the correct pinout? A: Yes. it works. Golf 7 MQB Gen2 full read OK with fox flash. DSG DQ200 MQB Gen2 Since 2019 Foxflash pinout TEMIC DQ200 (0AM, 0CW) GENERATION 2 www.iecutool.com