PCMtuner-tool

  Foxflash new user report: BMW Msd80 & msd81 read in boot mode OK Password on the table OK Transfer ISN and write on msd81 OK Checksum by the tool Foxflash BMW MSD80 Boot pin SIEMENS MSD80 [ TC1796 INT.F.] — BMW Step 1: Password Search To find the password, connect via OBD to the car. Use the driver: → TOOLS BOOT MODE → INFINEON TRICORE Tool Password → OBD PASSWORD MSD80/81/85/87 BMW → Click on "Find Password" and follow the software messages. The password can also be found on the desk by connecting the following pinout. Now that the password has been found it’s possible to read and write the control unit. See next step. Step 2: Read and write ECU Connect with the multifunction cable the following pinout and the boot shown below. Use the driver: → TOOLS BOOT MODE → INFINEON TRICORE Boot → SAK TC1796

 To read Fiat Magneti Marelli IAW 9DF ECU, you have 3 options: 1.Flex in boot mode You have to open the ecu or make a hole in the center of the inscription "Magneti" Marelli" and connect the starter through the hole With Flex you can have a vr file but it doesn’t can’t write in obd. 2. Use Kess3 , Foxflash , fgtech, autotuner for obd read and obd write (To read, you need 2 hours, to write 10/15 minutes) it makes a Reading in 2h23 For mj9dfhw001 fiat ducato using foxflash. HW001 obd Hw002 boot, 5 minutes of work with opening the computer, FoxFlash takes a long time to read and write. with kess3 OBD 1:30 reading, 15 min writing. with autotuner, he does it pretty fast but only in virtual reading and reading and writing via Obd 3. Use ktag, fgtech, dfox, in jtag by open ecu. FYI: Depends on hardware version. bench is the same 2.30 hours of reading and but sometimes impossible to write. HW000 is ok to write on bench. 0001 0002 impossible to write a mod. R

  FormulaFlash programmer read and write Audi A4 2.0TFSI 2017 MG1CS001 ECU successfully. ECU Bosch MG1CS001 Bench mode. Read eeprom ok Read flash ok Write eeprom ok Write flash ok Checksum by Formula Flash. www.iecutool.eu

  Alientech KESS3 read and write Mercedes Benz Sprinter 303CDI W906 ECU successfully. Model: Sprinter 303CDI W906 ECU: DELPHI CRD2 Mode: OBD Remapping via OBD with Alientech Kess3

 Foxflash programmer read and write Citroën DS3 2011 1.4 VTI ECU successfully. Bosch MEV17.4 ECU Read ok on bench Write ok on bench Stage 1 Checksum by foxflash Foxflash pinout to BOSCH MEV17.4 [ 1766/96 ] — Peugeot, Citroen [Gasoline] To read and write use the following driver: → BENCH TRICORE → PEUGEOT / CITROEN → TC1766 or TC1796 — PSA → MEV17.4 Some MEV17.4 enter in Bench mode with the brown wire on pins D2. If with the previous pinout doesn’t enter in bench tricore mode, then try again by connecting it as follows: www.iecutool.eu

  FormulaFlash read and write Renault EDC17CP42 ECU successfully. Read 1 min on bench Write 1–2min on bench Checksum with Formula Flash www.iecutool.eu

  FormulaFlash programmer software update to V1.0.0.4 on May 27th, 2024. ADDS BOOT MODE NEW PROTOCOLS & NEW CHECKSUM 1. Newly added Bosch MEDC17 series CheckSum 2. Newly added Bosch TC17XX series BOOT mode reading and writing