PCMtuner-tool

 The Fetrotech tool silver works with pcmtuner because PCMtuner has a bridge at this point. It works on the same software, the difference is in the bridge. One of our customer took both black and silver board and found the difference. if you want your silver fetrotech to work alone. then do a little modification. that is the difference between black and silver. much more comfortable work. User feedback: I did it and it's work, made a bridge in silver fetrotech PCB and now work standalone. works perfectly, I tested on edc17cp14. You are at your own risk.

 Read and write EDC17C60 PSA with fetrotech tool black successfully, DFP+EGR+ TPROT OFF. tprot off manually same as with pcmtuner. reading/writing with fetrotech, DPF+EGR off by DAVINCI 1. O. 28, TPROT off with WINE. checksum with wimols, fetrotech also does it

  Problem: The car is Peugeot Boxer 2011 year, 2.2 diesel with Sid 208cecu. After reading the flash such information with pcmtuner . Read password late flash. Will I not count when writing the checksum? Error 'Failed to verify checksums. This file is either corrupted or designated for different ECU' Solution: You have to uncheck the checksum box. You need to manually do checksum tool won't correct. Read http://www.pcmtuner.org/ford-psa-sid208-sid208-bsl-guide-with-pcmtuner/

 New feedback today: PCMTuner read and write DQ250C gearbox via OBD successfully. Manual StageX tune. It is a 2010 CBAB, mecatronic unit 2005 (TCU much better insead AT/AJ) Read/write true via obd2. NOTE: OBD is only a flash file, you can only read EEPROM from the bench if doing a TCU cloning.

  Fetrotech Tool Silver Feedback from iecutool.com customer: After install, and received licence, reinstall Fetrotech setup again, will work no problem (Windows 7 Ultimate x64) Disable all antivirus and firewall. EDC16C34 — Read/Write OK MD1CS003 — Read/Write OK

 Here is the pcmtuner wiring diagram pinout to EMS 2205 Ford Fiesta 1.6 petrol USA. Writing, checksum correction only in OBD bench (with obd breakout cable ) also try read password with module 53 , if read password then can possibly do ecu in BSL too Bootpin

 SIMOS 8.6 requires unlocking in BSL mode by the appropriate module. BSL is usually boot mode for unlock. Same as PCR2.1 . Example: Audi A7 2012 2.8 fsi simos 8.6 unlock, after read/write simos8.6 with pcmtuner successfully. all resistor 1 kom How to work with blocks that require unlocking (PCR2.1, SIMOS8.6): 1) Check the current lock status in the car, if the check is disabled, you can go to read-write, otherwise follow the instructions 2) Remove the unit from the car, open it, transfer the processor to BSL mode using the connection below (PCR2.1, SIMOS8.6), the work as a whole as in the package 53 (you can use tools like powerbox, and you can do without them) SIMOS8.6 Unlock pcmtuner pinout Red — +12, Black — GND, Yellow — CAN-HIGH, Blue — CAN-LOW 3) Choose "SIMOS8.6 (EEPROM/UNLOCK/BSL) or PCR2.1 (EEPROM/UNLOCK/BSL)" depending of ECU type 4) Click Identification — save ECU data somewhere in a text file. 5) Click Read — save the EEPROM 6) Given that EC