PCMtuner-tool

 Q: I am looking for the pcmtuner pinout for a mev17.2.1 and I found it but there is a brown thread and I don't know what it corresponds to. A: lay it down in 29 and lay back in 11 Here is the pcm flash pinout MEV17.2.1 TC1796 the other sent from the pcmtuner app

  Fetrotech Tool EDC16C2 Mercedes pinout:- please also connect CANH + CANL pinouts for fetrotech are already available, this is fix

  Problem: Can I read Nissan March 2016 1.6 petrol engine ME 17.9.55 ecu with pcmtuner ? I tried module 71 but it is failing. Solution: pcmtuner ME17.9.55 ecu pinout use labels not colors. try GPT0 and GPT1 on pins marked yellow (any order may swap later), but please power everything off and restart PCM tuner and app before trying to make ID, if not ID then swap GTP wires and try again. If still failed, open ecu and check what TC17xx fitted, power on bottom row different and of course GPTs read password after ID to as this may not work like EDC17/MED17 automatic password.

 Q: Is it possible to read the VW MED17.1.27 control unit ecu with pcmtuner ? I made the connection but failed. Solution: Here is the MED17.1.27 pinout to pcmtuner module 71 If failed to read ecu, disconnect EVERYTHING, Repin ECU slowly and carefully making sure all pins are contacting, make sure the breakout cable is pushed properly into the pcm tuner device, restart computer, then add 12v power — and try again BUT first ID, do try and read, if not ID then no point.

 Windows 10 is recommended for fetrotech tool software installation. If you have Win7 laptop only, try the solution here. User working experience: 'I would like to share my experience of installation Fetrotech software on Windows 7 x64 unlimited. So, Fetrotech didn't want to start after installation. I have tried all tricks/recommendations but no result. Helps only activation of superadmin. How to Activate Super Administrator Account in Windows: https://techviral.net/activate-super-administrator-account-in-windows/ Before, I have noticed, when I go to properties of license files to unblock the file and apply the changes, everything looks Okay, but when you open it again, blocking still there… So, was not enough admin permission and file came back to block. After opening superadmin it stay unblocked. Good luck. If you install software on Win10, follow solutions here http://www.pcmtuner.org/fetrotech-tool-software-win10-pro-installation/ http://www.pcmtuner.org/fe

  Problem: What problem? I try to read Mercedes C320cdi edc17cp01 ecu with pcm tuner. Skipping when I upload a modified file to pcmtuner , the ignition turns on and off continuously. Solution: Calibration area so skips other parts of memory as informed, its normal, the problem is your file. Between 14000–1FFFF is otp it's the Service area. In module 71 it skips OTP area as this area is the part that can only be read but never rewritten. Ask someone else to do your file remap. You can Set this in settings when a complete write is Necessary. You can find settings when you click on write a settings screen opens.

 EDC16 MG1 MD1 ECU programmers Fetrotech Tool and ECU Bench Tool which one is better? Check the table comparison below: In sum: Fetrotech tool software is encrypted, it requires activation. Installation requires a modern laptop. ECU bench tool does not need activation and software is easier to install. But it is less stable than fetrotech. Fetrotech is a good buy once they solve the installation problem. Fetrotech has better technical support as it is from pcmtuner team. You can check wiring diagrams in pcmtuner app. Don't update both tools online. Update by link once new version comes out.