PCMtuner-tool

  Problem: PCMTuner failed to read EDC17C74 on bench mode. pinout was good. where is problem with reading? Here are some tips: 1. Give it 13.5v power supply and you'll be fine. or read again several times, it should be fine. 2. Try obd module 50 virtual read. Feedback: done it like that (vr read) and write was Ok. www.iecutool.com

 EDC17CP20 Audi A4 B8 2.0 TDI EDC17CP20 read and write OK with Fetrotech tool . DPF, EGR OFF STAGE1 Read and Write OK [Fetrotech] The fetrotech silver has died. Remove the black case to the silver one. Please use this pinout. gpt remains unchanged. www.iecutool.com

Fiat 500 MARELLI IAW 9GF read/write with foxflash successfully on bench in car. MARELLI 9GF — Fiat, Alfa Romeo, Lancia [Gasoline] bench pinout to foxflash read, write ok, checksum by tool.

 Q: Who were able to read/write VAG DSG DQ200 MQB Gen2 gearbox with Foxflash ? What is the correct pinout? A: Yes. it works. Golf 7 MQB Gen2 full read OK with fox flash. DSG DQ200 MQB Gen2 Since 2019 Foxflash pinout TEMIC DQ200 (0AM, 0CW) GENERATION 2 www.iecutool.com

  Problem: My windows 8 laptop doesn't recognize pcmtuner box. What should i do? Win8 driver enforcement is issue, use win7 or win10 system.

 New Foxflash slave version will be available by the end of October 2023. What's the Difference Between Foxflash Master and Slave? The difference between the Slave and Master is the ability to access and edit the data read from the vehicle. With a slave tool you read and write encrypted files. These files can only be modified by a specific master. This master is a file provider designated when you buy the tool. Your slave tool is linked to this master. Does the slave version have all of the foxFlash function? Yes, it have all of the foxFlash function. Who need Slave tool? 1: Anyone who cant develop his own tuning file, but need some good tuner can supply, so they will need it . 2: Anyone who wants a lower price get this tool. 3: Anyone master owner want to develop his own dealer tuning net in the world. Can this foxflash slave tool upgrade to Master? Yes, you can upgrade it as master, Any slave tool can be remotely transformed into master tool if the following c

  Foxflash read and write Renault Continental EMS3155 perfectly in boot mode, checksum by tool. Read and write work good. SIEMENS EMS3155 [ TC1782 INT.F.] — Renault Foxflash Pinout 1.Search password: To find the password, connect via OBD to the car. Use the driver: → TOOLS BOOT MODE → INFINEON TRICORE Tool Password → OBD PASSWORD EMS3155 RENAULT — NISSAN → Click on "Find Password" and follow the software messages The password can also be found on the desk by connecting the following pinout. Now that the password has been found it's possible to read and write the control unit. See next step. 2. Read and write ECU Connect with the multifunction cable the following pinout and the boot shown below. Use the driver: → TOOLS BOOT MODE → INFINEON TRICORE Boot → SAK TC1782 www.iecutool.com