PCMtuner-tool

 What's the difference between pcmtuner, fetrotech tool and MPM ecu tuning tool? This is frequently asked by iecutool.com customers. Here's the clue. PCMTuner App PCMTuner App is an application that can control pcmtuner flash, fetrotech, MPM and more feature plugins from pcmtuner team. The appliation provides instructions and wiring diagrams. PCMTuner : PCMtuner is a customized read-write device specially used for vehicle engine control system (ECU) and transmission control system (TCU). PCMTuner flash is based on pcm-flash which comes with 67 modules . The smart USB dongle stores the protocols. The dongle can be purchased alone (to work with ktmbench, openport, SM2 Pro). PCMTuner vs PCMTuner dongle Pcmtuner is a complete hardware device with future expandability linked to the pcmtuner software suite. The dongle allows you to run the pcm flash modules etc PCMtuner flash can read and write ECU via OBD, Bench, Boot, OBDvr modes. Fetrotech Tool: This is an a

 In order to get your pcmtuner and fetrotech tool activated as soon as possible, please follow the instruction below. 1). PCMTuner Activation : Provide BOTH license key + device ID to info@tuner-box.com or iecutool.com customer service The device ID can be found on the back of the device Providing a license key only will not receive an activation. Fake pcmtuner does not have a device ID. It will not be activated by pcmtuner technician. 2). PCMTuner Dongle Activation Provide an image of your pcmtuner dongle and package + license key to info@tuner-box.com or iecutool.com customer service 3). VZ-performance Activation: VZ tuner account is no longer automatically activated in 24 hours !!! Before activating VZ account, check if your pcmtuner/dongle has been activated. If you get your device activated and registered, your VZ account is activated at the same time. If the device is activated but not yet registered with an email, provide pcmtuner serial number + r

 SID208 PSA can all be done with pcmtuner module 60 . Follow instructions here: 1. Read password directly in the car via OBD and safe. 2. Open ecu and according to the scheme two resistors solder 1 k-ohm. 3. Then read in BSL mode and unlock ecu. 4. Desolder resistors and mount ecu in the car, then write in normal mode PCMTuner PSA SID208 Boot Pinout Ford PSA SID208 SID209 BSL Guide with PCMTuner

 Question: Mazda CX-5 2.2 diesel 2018, 150HP …can read with PCMTuner ? I don't see any info in the instructions. Solution: It reads via OBD. OBD does not have instructions. Find your OBD port. And read with pcm tuner via module 10. Also if starline alarm fitted disconnect alarm module behind dash. If your ecu is on table and not in car, then as the tuner you will have to find correct pinouts. http://www.pcmtuner.org/pcmtuner-mazda-denso-ecu-pinout-obd-and-bench/ http://www.pcmtuner.org/pcmtuner-mazda-rf7n-ecu-pinout/

  Fetrotech tool (Silver) read and write 2018 Peugeot 5008 MD1CS003 ecu successfully. 2018 — Peugeot 5008 1.5 BlueHDi 130HP MD1CS003 — Read/Write and do checksum. Very fast. Amazing.

 Nissan qashqai 2013 Edc17c42 Dtc off Read and write with pcmtuner without problem. Using external Laboratory power supply, 12.4v. select the module 71 TC1767 for read flash and eeprom. pcmtuner app will show you wiring diagram and instructions.

 Hyundai Tucson 2.0 CRDI 2006 EDC16C39 ecu read ok with fetrotech tool very fast. Hyundai Chevrolet EDC16C39 pinout Fetrotech read and write without problem